Petrochemical Standards

Diesel; Multi-Parameter Certified Reference Material, UKAS ISO 17034 / ISO 17025 Certified, 500 mL, Paragon Scientific™

Multi-Parameter Certified Reference Materials are premium level, dual certified reference materials certified in accordance with both ISO 17025 and ISO 17034 under our UKAS accreditation. Fully dual certified in accordance with ISO 17025 and ISO 17034 under our accreditation by UKAS.

Organometallic Oil Standard, 21-Element, 300μg/g, SPEX CertiPrep™

ISO/IEC Guide 34 Certified, NIST-Traceable Certified Reference Material

Sulphur in Hydrocarbons, Jet Aviation Fuel, 250mL (15.2 mg/kg), Paragon Scientific™

Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Mercaptan Sulphur Content ISO 3012

Sulfur Certified Reference Material, UKAS ISO 17025 & ISO 17034 Certified, Sulfur in Synthetic Diesel, 0.0010 % (10ppm), 100mL., Paragon Scientific™

Paragon Scientific’s Synthetic Diesel Sulfur CRMs are suitable for calibration, verification or for use in quality control procedures used for analysing sulfur content in petroleum products, with sulfur content ranging from 0 (Blank) through to 5.0000% (50000ppm) for each material.

Certified Reference Material Fatty Acid Methyl Ester (FAME) Standard, Paragon Scientific™

Fatty Acid Methyl Ester (FAME) Certified Reference Material for the calibration and verification of laboratory instruments used for the determination of Fatty Acid Methyl Ester (FAME) content in middle distillates - Infrared spectrometry method, EN 14078

Distillation Standard ASTM D 86; NF EN ISO 3405 (Nominal value: 30-178.6 °C), Paragon Scientific™

Distillation Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Distillation according to ASTM D86. Alternative test methods are IP 123 and ISO 3405

Density Standard, ASTM D 4052; ISO 12185 (Nominal value: 0.7933 g/mL, 15 °C), Paragon Scientific™

Density Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Density according to ASTM D4052. Alternative test methods are IP 365 and ISO 12185.

Chromium Oil Standard in Base Oil 75, 5000μg/g, SPEX CertiPrep™

Diethylamine 2000 μg/mL in Water, Dr. Ehrenstorfer

Discover Dr. Ehrenstorfer’s certified reference materials: available in multiple formats, including multi-component regulatory mixtures, to power your food and environmental analysis with traceable, ISO-accredited quality

Ultra Low Particle V-Solv+Co Solvent

VHG Labs offers ISO 17034 metallo-organic and aqueous inorganic certified reference materials for oil, fuel, and coolant analysis as well as a variety of certified standards for environmental, pharmaceutical, and industrial applications

Organometallic Oil Standard, 21-Element For Wear Metal Analysis, SPEX CertiPrep™

ISO/IEC Guide 34 Certified, NIST-Traceable Certified Reference Material

Organometallic Oil Standard, 21-Element, 100μg/g, SPEX CertiPrep™

ISO/IEC Guide 34 Certified, NIST-Traceable Certified Reference Material

V23 Standard: Al, Ba, B, Cd, Ca, Co, Cr, Cu, Fe, K, Li, Pb, Mg, Mn, Mo, Ni, P, Sb, Si, Ag, Na, Sn, Ti, V, Zn @ 100 μg/g in 75 cSt Hydrocarbon Oil

VHG Labs offers ISO 17034 metallo-organic and aqueous inorganic certified reference materials for oil, fuel, and coolant analysis as well as a variety of certified standards for environmental, pharmaceutical, and industrial applications

V26 Standard: Ag, Al, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, In, Li, K, Mg, Mn, Mo, Na, Ni, P, Pb, Sb, Si, Sn, Ti, V,W, Zn @ 500 μg/g in 75 cSt Hydrocarbon Oil

VHG Labs offers ISO 17034 metallo-organic and aqueous inorganic certified reference materials for oil, fuel, and coolant analysis as well as a variety of certified standards for environmental, pharmaceutical, and industrial applications

Copper Standard in Base Oil 75, 5000μg/g, SPEX CertiPrep™