EVOS® Onstage Vessel Holder, 1x35mm Petri Dish

Optimizes incubator space when used to stack CellSTACK Culture Chambers X5 CellSTACK stacking device, ABS, orange, Nonsterile, Individually Wrapped

Choice of configurations for use with LSE Digital Dry Bath Heater single block, 24x0.5ml tubes

Save valuable bench space with analog or digital dry block heaters, featuring precise temperature control resolution. Dri-Bath For Three Blocks

Run up to 6 reactions simultaneously. Electrothermal™ OS6000 Series Omni-Reaction Station has a working volume of 1 up to 250mL when using the same controlled temperature and stirring rate. OMNI-REACTO STATION OS6050 6 POSITION WORKINGvolume 5 to 50mL 240V 50-60Hz 300mm x 300mm x

Get maximum flexibility for your Dry Baths/Block Heaters with a variety of accessories for any application. Mixed block 1.5 & 2.0ml

Intrusive IR probe Stem stainless steel for Stem

Allow production of monolayer cell cultures in standard roller culture vessels. Rotation Alarm System for cell roller model 4868,includes annunciator jack, FACTORY INSTALLED

Increase efficiency, enable portability 0-5 V Analogausgangsoption, für Steri-CultInkubatoren, werkseitiger Einbau

Half shelf system 6 half-width in place of 3 full

A variety of blocks for any application Fisherbrand 46 x 6mm dia block

Stacking accessories to customize your Heracell VIOS CO2 incubators Adaptor required for stacking 250i models

Support stands and shelves X3 HERAtrays 1/3 width in stainless steel

Precisely control the CO₂ and temperature with Thermo Scientific™ Forma™ Series II 3110 Water-Jacketed CO₂ Incubators. INCUBATOR FORMA 3121 CO2, HEPAfiltered,single chamber, water jacketedwith IR

Precisely control the CO2 and temperature with Thermo Scientific™ Forma™ Series CO2 Incubators.  Forma™ CO₂ Incubator Accessories are important components for optimal operation. Replacement HEPA2 VOC Filter, customer installed

Value for everyday cell culturing . The Fisherbrand CO2 incubator provides proven technologies for reliable, homogenous growth environment and dependable quality. Fisherbrand CO2 incubator, stainless steel 150L chamber, 90°C decontamination cycle, IR CO2 sensor

Optimize the performance of your Thermo Scientific™ Digital Cooling Bath by using these accessories. HEAT/COOL BATH BLOCK 13MM

Minimize the need to frequently change out cylinders and reduce the risk of running out of gas. These gas guards are factory installed and built in to specified CO₂ incubators. N2 BUILT-IN GAZ GUARD

Replacement filter and stands Adaptor required for stacking Steri-cycle i160

Preserve floor space with stackable Thermo Scientific™ Forma™ 310 Direct-Heat CO₂ Incubators, which combine high capacity and an easy-to-use design. CO2 INCUBATOR DIRECT HEAT CT

For use with Fisher Scientific Isotemp CO₂ and Thermo Scientific Napco incubators as indicated Zweistufiger CO2-Regler

Eliminate unwanted airborne contaminants with the on-demand, high-temperature sterilization of Thermo Scientific™ Forma™ Steri-Cycle™ CO2 Incubators. INCUBATOR FORMA STERI-CYCLE CO2184.1L stainless steel contains IR sensor (suitabl

single block, 12x17mm tubes

Thermoblock for 4 DualChips

Increase your application capabilities with a variety of accessories for the Compact Dry Baths/Block Heaters. Heat Insulator for 4blk

Address specific requirements to the relative humidity system of your chamber. Condensate Evaporator for model 3948 and 3907, includes separate line cord, 240V

For use with Fisher Scientific Isotemp CO₂ and Thermo Scientific Napco incubators as indicated ROLLER BASE H7CM

For use with Thermo Scientific Heracell™ 150i CO₂ Incubators SUPPORT FRAME WITH DRAWERS780 mm, für CO2-Brutschrank HERAcell

Use these thermoblocks with the Eppendorf ThermoMixer™ comfort and ThermoStat plus for a wide range of heating, cooling and mixing applications. Eppendorf™ Thermoblocks for MTPs and Deepwell Plates fit almost any lab tube format and allow maintaining accurate, uniform temperatures. Thermoblock for MTPs and Deepwell plates, with lid

Improve your assay results by dry incubation and mixing of your samples simultaneously with this mixer. The Eppendorf ThermoMixer™ C is ideal for heating, cooling and mixing almost any of your lab vessels. ThermoMixer C w/o thermoblock, EU plug, 220-240VTHERMOMIXER C W/O THERMOBLOCK,