Filter Holders and Hardware

Thermo Scientific™ Nalgene™ Polycarbonate Filling Bell

Transfer sterile media aseptically from large containers to small media bottles or culture vessels using the Thermo Scientifc™ Nalgene™ Polycarbonate Filling Bell. FILLING BELL PC

Merck™ Glass Vacuum Filter Holder: 90 mm

Vacuum filter aqueous, organic, or corrosive liquids for particulate contamination analysis. Glass Filter Holder W/SS Screen, 90mm

MilliporeSigma™ Glass Vacuum Filter Holder, 47mm

Includes 300mL funnel, fritted base and cap, clamp, and alignment sleeve. Glass Vacuum Filter Holders, 47mm are used in vacuum filtration of liquids to produce clarified or particulate-free filtrate or to analyze particulate or biological contamination retained on the filter surface. All-Glass Filter Holder Assembly with 300 mL funnel, fritted base and cap, clamp, 1 L flask

GE Healthcare Whatman™ MicroPlus MBS I Membrane Filtration Accessory: Autoclaving Bags

Accessories for microbiological control filtration system X20 AUTOCLAVING BAGS

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (25mm)

Designed to handle small volumes of liquids for analysis of particulate or microbiological contamination 15ML GLASS FILTRATION SYSTEM 25MM

Merck™ 25mm Glass Microanalysis Vacuum Filter Accessories and Replacement Parts

Accessories for filter holders for sample preparation. 15ml Glass Funnel, 25mm

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with PTFE-Faced Fritted Glass Support (47mm)

Used for autoclaving with the filter in place and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination 300ML GLASS FILTRATION UNIT 47MM

DWK Life Sciences Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support and Ground Joint (47mm)

Recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate GLASS FILTRATION UNIT

DWK Life Sciences Kimble™ Kontes™ Component Parts For 47mm Ultra-Ware™ Microfiltration Assembly

For ultra-ware microfiltration assembly with stainless steel support STAINLESS STEEL FRIT FOR 5292F

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass support and GL 45 Style Bottle (47mm)

Designed to collect filtrate directly into a media-style bottle MICROFILTRATION ASSEMBLY ULTRA WAR

DWK Life Sciences Kimble™ Kontes™ Component Parts for 25mm Ultra-Ware™ Microfiltration Assembly

Component parts for 25mm Ultra-Ware ™microfiltration assembly SPARE FRIT 25MM

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support and Ground Joint (47mm)

Recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents FILTRATION UNIT 500/2000ML 47MM

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support and Ground Joint (90mm)

Recommended when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate COMPLETE GLASS FILTRATION SYST. 1L

DWK Life Sciences Kimble™ Kontes™ Clamps

For 90mm filter ALUMINIUM CLAMP FOR 90MM SUPPORT

Thermo Scientific™ Nalgene™ Vacuum Manifold

Allow for easy funnel manipulation with the widely spaced funnels of this vacuum manifold. This stable benchtop unit is made of high quality stainless steel. MANIFOLD VAKUM SS3 PLACEVABLE

Kontes™ Membrane Filtration Glassware from Restek

Used for routine filtration of corrosive liquids and removal of particles from HPLC solvents 1L GLASS FUNNEL 47MM

R&L Enterprises™ Nickel Plated Brass Vacuum Pump

Evacuates a 1L system to 200mbar in 40 seconds (water supply at 170kPa, consumption 3.5L). R&L Enterprises™ Nickel Plated Brass Vacuum Pumps do not require a tail pipe. Filter pump nickel plated brass

DWK Life Sciences Kimble™ Microfiltration Assembly Hardware

Use Kimble™ Microfiltration Assembly Hardware when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate. BASE FOR SS FRIT

Cole-Parmer™ Advantec 301900 Pressure Filtration Holder

Process samples from an in-line system or pressure vessel with this stainless steel holder. Cole-Parmer™ Advantec 301900 Pressure Filtration Holders maximize flow rates by applying positive pressure to the fluid over a broad membrane surface. 304 SS FILTER SUPPORT 142MM

Cole-Parmer™ PTFE O-Ring/Gasket/Seal

GASKET PTFE FOR SYRINGE FILTER HOLDER 13MM

Thermo Scientific™ Nalgene™ Filter Funnel Adapter

Use this bulk-packed version of funnel adapters included with 145- and 147-series analytical test filter funnels in high throughput QC testing laboratories. X25 145 FUN ADP,BK

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Solvent Filtration Solvent Pick-up Adapter

Converts Ultra-Ware filtration assemblies for inline filtration/degassing applications Pickup adapter Kimble solvent with 1/4 inch O.D.PTFE tubing

DWK Life Sciences Kimble&chase; Kimble™ Kontes™ ULTRA-WARE™ Filtration Adapter

This adapter assembly is designed to allow connection of a 47mm or 90mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. Filtrations-Adapter mit GL45-Anschluss, seitl.Kunstoff-Olive, gebogen

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support and Ground Joint (90mm)

Designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter Microfiltration Assembly with FrittedGlass Support and Ground Joint

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly Component Parts

Components for Ultra-ware™ microfiltration assembly PTFE FACED FRITTED GLASS SPOORT

  spinner