Tubes

Falcon 50mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning™ Falcon 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Falcon™ 15 mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 12,000 RCF (polypropylene) or 1,800 RCF (polystyrene) in a fully supported rotor with room temperature water. Corning™ Falcon™ 15mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes

Store samples from general cold storage to the vapor phase of liquid nitrogen with Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes.

Fisherbrand™ Premium Microcentrifuge Tubes: 1.5mL

Available in eight colors or in assorted-color packs.

Corning™ Internally Threaded Cryogenic Vials

Manufactured from polypropylene for stability in extreme temperature conditions. Corning™ Internally Threaded Cryogenic Vials provide a safe and secure vessel for ultra-low temperature storage of valuable cell cultures and biological samples.

Falcon™ Round-Bottom Polystyrene Test Tubes

Constructed of optically clear polystyrene for easy viewing of sample. Corning™ Falcon™ Round-Bottom Polystyrene Tubes are widely used and referenced in laboratory protocols.

Fisherbrand™ Premium Microcentrifuge Tubes: 0.6mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling

Applied Biosystems™ MicroAmp™ Reaction Tube with Cap, 0.2 mL, assorted colors

Designed to maximize sample recovery and ensure uniform heating/cooling

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Imprinted clear black graduations ensure accurate readings

Fisherbrand™ Borosilicate Glass 3.3 Reusable Test Tubes

Use Fisherbrand™ Borosilicate Glass 3.3 Reusable Test Tubes in the laboratory. They are available in various metric diameters and are DIN 12395 certified.

Applied Biosystems™ MicroAmp™ Optical 8-Cap Strips

Tight seal minimizes evaporation and contamination

Brand™ Micro Haematocrit Capillaries, Non-Heparinized

For use in haematocrit centrifuges.

Fisherbrand™ Low-Retention Microcentrifuge Tubes

Provides a secure seal—even over extended periods. Critical applications where minute sample recovery is important.

Greiner Bio-One Round Bottom Polypropylene Culture Tubes

With high thermal, mechanical and chemical stability.

Corning™ Centrifuge Tubes with CentriStar™ Cap

Features CentriStar™ caps with an easy-on/easy-off flat top and offers advanced ergonomics with wider knurls and roll-over edge design for easier gripping. Corning™ Centrifuge Tubes with CentriStar™ Caps leak-proof design comes with a revolutionary plug feature that virtually eliminates all seepage when used under recommended conditions.

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes

Perform a plethora of applications thanks to the excellent mechanical strength of Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes.

Fisherbrand™ Premium Microcentrifuge Tubes: 2.0mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling

Fisherbrand™ 0.2mL PCR Tubes

With integral “snap shut” cap

Thermo Scientific™ Snap Cap Low Retention Microcentrifuge Tubes

Improve sample recovery without additives or coatings. These tubes offer maximum sample recovery by significantly reducing surface binding.

Thermo Scientific™ Tubes, 0.2 mL, Flat Cap, Green

0.2 mL individual tubes with attached flat or dome snap shut caps, available in a variety of colors

Thermo Scientific™ Nunc™ 15mL and 50mL Conical Sterile Polypropylene Centrifuge Tubes

These premium, high-quality conical tubes are environmentally friendly, and allow for increased traceability with the largest writing area on the market.

Falcon™ Round-Bottom Polypropylene Test Tubes

Manufactured from polypropylene for excellent chemical and thermal resistance. Corning™ Falcon™Round-Bottom Polypropylene Tubes are tested to withstand 3000 x g centrifugation.

Thermo Scientific™ Tubes and Domed Caps, strips of 8

Optimize PCR and qPCR with these 0.2 mL strip tubes, available as 8 tubes per strip in several colors or 12 tubes per strip.

Applied Biosystems™ MicroAmp™ Fast 8-Tube Strip, 0.1 mL

Maximized thermal conductivity reduces PCR amplification times

Thermo Scientific™ Tubes, 0.2 mL, flat cap, red

0.2 mL individual tubes with attached flat or dome snap shut caps, available in a variety of colors

Eppendorf™ PCR Tubes

Ensure efficient heat transfer to the sample with these tubes, thanks to their thin, even wall thickness and smooth wall surface. Eppendorf™ PCR Tubes are easy to open, but provide tight sealing to prevent evaporation in PCR.

Fisherbrand™ Reusable Glass Tubes with Phenolic Screw Caps

Phenolic screw cap with white rubber liner

Axygen™ 8-Strip PCR Tubes, 0.2 mL

Available in a variety of colors for easy sample identification. Axygen™ 8-Strip PCR Tubes, 0.2mL are constructed of sturdy polypropylene. Each non-sterile, conical tube features thin and consistent wall thickness. Sold with flat or domed caps to prevent sample loss or without caps.

Gosselin™ Round-Base 10mL Test Tubes

Providing high resistance to centrifugation up to 3000g with a suitable adaptor in a balanced rotor. Gosselin™ Round-Base 10mL Test Tubes are manufactured from polystyrene plastic.

  spinner