Chromatography Spare Parts

Thermo Scientific™ Uniguard™ Direct-Connection Guard Cartridge Holders

Eliminate the requirement for extra fittings with Thermo Scientific™ Uniguard Direct-Connection Guard Cartridge Holders. GUARD CARTRIDGE HOLDER UNIVERSALUniGuard direct connection for 1mm I.D.

SGE™ SilTite™ Ferrule Starter Kits Replacement Ferrule

Specially designed ferrule and nut system developed specifically for fused silica GC columns and GC/MS systems Ersatz SilTite Metall Ferrules f.alleVerbindungen,0.1-0.25mm Kapillaren ID

Thermo Scientific™ 100% Graphite Ferrules for Thermo Scientific Instruments

Ensure reliable connections for Thermo Scientific™ GC instruments with these Thermo Scientific™ 100% Graphite Ferrules for Thermo Scientific Instruments. X10 Ferrule Thermo Scientific for injectors/detect

Thermo Scientific™ Septa

Use low bleed, robust BTO Septa for demanding GC-MS applications. MARATHON SEPTA, 17mm DIAMETER 50pk

GE Healthcare PEEK Connector 1/16 in. Luer

Set of two (2) polyetheretherketone 1/16 in. Male/Luer Female connectors for connection of a syringe to the top of a chromatography column in the ÄKTA Chromatography System. X2 CONNECTOR 1/16 INCH MALE/LUER FEMALE (PACK OF2)

Thermo Scientific™ 15% Graphite/85% Vespel Ferrules for Thermo Scientific Instruments

Ensure reliable connections for Thermo Scientific™ GC instruments with these Thermo Scientific™ Ferrules. X10 Ferrule Thermo Scientific 15% graphite/85%

Thermo Scientific™ Stainless Steel Unions, Tees and Crosses

Minimize system dead volumes and ensure reliable high-pressure connections in your HPLC system with Stainless-Steel Unions, Tees and Crosses. Cross SS 10-32, 1/16 x 0.02'

Thermo Scientific™ Ferrules for Agilent™ Instruments

Ensure reliable connections for Agilent™ GC instruments with these Thermo Scientific™ Ferrules for Agilent Instruments. X10 Ferrule Thermo Scientific GC graphite 0.45 to

Merck™ Millex™ Filters: Inlet and Outlet for Silicone Tubing

Protect vacuum sources from contamination and moisture damage X100 Millex-FG 50mm PTFE .2um Non-sterile HB-HB

Merck™ Millex™ Filters: Inlet and Outlet for Latex Tubing

Protect vacuum sources and tank/bioreactor venting from contamination and moisture damage. MilliporeSigma™ Millex™ Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. Available in 0.2, 0.45 and 1.0µm pore sizes. X10 Millex-FA 50mm PTFE 1.0um Non-sterile HB-HB

GE Healthcare Polypropylene On-line Filter Kit

Used for AKTA chromatography systems.  GE Healthcare Polypropylene On-line Filter Kits are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules. X10 ONLINE FILTER KITpack of 10 pcs

GE Healthcare PEEK Male Connector

Connect tubing of different sizes. GE Healthcare Life Sciences™ PEEK Male Connector is an important accessory for optimal chromatography. X10 CONNECTOR 1/16 INCH MALE

GE Healthcare PEEK Tubing

PEEK tubing comes in a variety of internal diameter sizes.  GE Healthcare Lifescience™ PEEK Tubing is an important chromatography accessory. 2M PEEK Tubing, id 0.5 mm, od 1/16''

GE Healthcare Pre-flanged Capillary Tubing

Pre-flanged Tubing I.D. 1.9mm/O.D. 2.7mm, length 1m

GE Healthcare Packing Tubes

PACKING TUBE 20 HISCALE 16, 1/Cs, MA: 28-9868-16

Scat™ PTFE Capillaries

3M PTFE tubing 1,6mm OD (1,0mm ID)

Cole-Parmer™ CPC™ Quick-Disconnect Valved Coupling Body

Quick-disconnect fitting with simple push-to-connect interface for your rigid tubing COUPLING F COMPRESSION 1/4''OD

Thermo Scientific™ Pre-cut PEEK Tubing in a 5-foot Coil

Thermo Scientific™ Pre-cut PEEK Tubing in a 5-foot Coil is easily cut to the desired length. TUBING PRECUT FOR HPLC PEEK NOTresistant to nitric/sulfuric acid DCM THF DMSO

Thermo Scientific™ UHPLC Filters

Protects columns without compromising performance.

X5 Filter Thermo Scientific replacement cartridge2.1mm ID, 0.2µm, VE=5 Stück

Thermo Scientific™ SWAP-IT™ GC-MS Interface System

Make column changeovers quick and easy. Use this GC-MS interface system to switch capillary columns without the need to vent your mass spectrometer (MS).

SWAP-IT GCMS INTERFACE THERMO

Thermo Scientific™ RheFlex™ Two-Piece PEEK Fittings

Thermo Scientific™ RheFlex™ Two-Piece PEEK Fittings provide inert, metal-free connections. X5 FERRULE AND NUT RHEFLEX FOR1/16 inch metal or plastic tubing PEEK reliable

Thermo Scientific™ Replacement Filters for Unifilter Direct-Connection/ColumnPlus

Thermo Scientific™ Replacement Filters for Unifilter Direct-Connection/ColumnPlus are offered as particle size 0.5μm. X5 HPLC filter Thermo Scientific UNIFILTER direct-

Cole-Parmer™ CPC™ Sixtube™ Female Acetal Coupling Insert

Easily handle multiple tubing lines in processes that require connection and reconnection. Multiline couplings simplify the manual steps in your process for quick transfers and minimize your down time. 6-LINE INSERT F 1/8'' ID

Thermo Scientific™ Septa

X48 BTO SEPTA 17MM DIAMETER IN BLISTER PACKAGING

Thermo Scientific™ PEEKsil™ Capillary Tubing

Get excellent chemical compatibility and very low carryover using the highly inert Thermo Scientific™ PEEKsil™ Capillary Tubing. X5 Tubing 100x0.1mm PEEKsil

Thermo Scientific™ SilTite™ Ferrule Kits

Eliminate leaks with Thermo Scientific™ SilTite Ferrule Kits. X10 FERRULES SILTITE KIT 0.32 MM

Thermo Scientific™ Retention Gap Kits

Install a retention gap/guard column to your analytical column with a single kit. Deactivated silica Kapillare 0.53mm ID, 5m

Thermo Scientific™ RheFlex™ High-Pressure Fittings

Ensure reliable high-pressure connections with Thermo Scientific™ RheFlex™ High-Pressure Fittings. RHEFLEX FERRULE 10-32 1/16 SHORT

  spinner