REFRIGERATED TRAP MIVAC SPEEDTRAP-50°C, mit 1000 ml Glasgefäss

For use with trunnions on swing-out rotors. 50GR Hettich Grease

For Thermo Scientific Sorvall Stratos Centrifuge X2 Sealing rings Heraeus replacement including

Provides a soft yet secure seal around the edges of a rotor lid. X5 SEALING FOR ROTOR LID FA452411 AND FA451617

Required for stacking rotors F-45-72-8 and F-45-48-11 Spacer for sandwich use of fixed-angle rotors

Allow you to operate your centrifuge operation away from, or under, your primary workbench SAFETY CART HERAEUS ERGONOMIC 600 X 560 X 670MM76000077

For use with Eppendorf Adapters and buckets X4 RUBBER MAT ROTOR A-4-81 5810(VE=4Stck.)

MOTOR CAP CPL., WITH SPEED SENSOR

Use these caps with S-4x1000 plate/tube bucket, S-4x750 plate bucket or S-4x Universal Large Rotor x2 Aerosol-tight caps for rotor S-4xUniversal-Large

Replace cracked, dry or otherwise faulty O-rings with this replacement set of two that includes grease. X2 O-ring Thermo Scientific sealing replacementfor HIGHConic II aluminum fixed angle rotor (pack

For use with mySPIN 6 and mySPIN 12 rotor knob

Designed for use with Eppendorf Rotors and Centrifuges Rotor key

Designed for use with Eppendorf Rotors ROTOR LID FOR F-45-30-11

For use with Eppendorf Rotors X5 SPARE SEALING FOR ROTOR LID S-24-11-AT

X2 CLAMP FOR ROTOR A-4-81 58105810(R) (VE=2Stck.)

X3 Spare part for Eppendorf 5415D / Yr. 99,

LID FOR MICROTITER SUSPENSION 5628

CARRIER 1XFALCON 50ML FOR 18766

REPLACEMENT ROTOR LID FOR ROTOR FA-45-6-30

Designed for use with Hettich Rotors. Hettich rotors are optimized for continuous duty and long service life COUVERCLE HERMETIC ALU 24/30µTUBESfür Rotor 2424

Designed for use with Eppendorf Rotors Spare lid for rotor FA-45-24-11, aerosol tight

SUSPENSION FOR MICROTITRE PLATES

LID FOR BUCKET 5158N

10xsteel sleeves 15ml for rotor F-35-30-17

Designed for use with Eppendorf Rotors Spare rotor lid for FA-45-12-17, aerosol-tight

A range of options for secure closure on microcentrifuge rotors to help contain samples. REPLACEMENT O RING 24X2

Powers Fisherbrand™ Mini Centrifuge in a number of countries. Fisherbrand™ Power Adapter for Mini Centrifuge accepts cords from EU, UK, CH and USA. Power adapter replacement accepts worldwide voltag

Accessories for accuSpin™ 8C small centrifuge 8UNIT Spacers (short & green)

Designed for use with Eppendorf Rotor A-4-62-MTP MTP-buckets Retrofit kit for rotor A-4-62-MTPor 1 deepwell plate

x2 spare adapter clamp, for 100ml bucket