Centrifuges and Microcentrifuges

Falcon 50mL Conical Centrifuge Tubes

Falcon 50mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning™ Falcon 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Greiner Bio-One Conical Bottom Polypropylene Test Tubes with Screw Cap

Greiner Bio-One Conical Bottom Polypropylene Test Tubes with Screw Cap

For centrifugation and applications that require chemical and thermo resistant vessels.

Falcon™ 15 mL Conical Centrifuge Tubes

Falcon™ 15 mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 12,000 RCF (polypropylene) or 1,800 RCF (polystyrene) in a fully supported rotor with room temperature water. Corning™ Falcon™ 15mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.

Fisherbrand™ Premium Microcentrifuge Tubes: 1.5mL, Natural; 1.5mL; O.D. x L: 10.8 x 40.6mm

Fisherbrand™ Premium Microcentrifuge Tubes: 1.5mL, Natural; 1.5mL; O.D. x L: 10.8 x 40.6mm

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling

Eppendorf™ Protein LoBind Tubes

Eppendorf™ Protein LoBind Tubes

Eppendorf™ Protein LoBind Tubes are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results.

Eppendorf™ Polypropylene Protein LoBind Microcentrifuge Tube

Eppendorf™ Polypropylene Protein LoBind Microcentrifuge Tube

Store peptide, antibody or virus samples in these LoBind microcentrifuge tubes. Eppendorf™ Polypropylene Protein LoBind Microcentrifuge Tubes are ideal for work in protein research, mass spectrometry and protein array sample preparation.

Fisherbrand™ Premium Microcentrifuge Tubes: 0.6mL

Fisherbrand™ Premium Microcentrifuge Tubes: 0.6mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling

Hettich™ Adapter for Carrier no. 1427

Hettich™ Adapter for Carrier no. 1427

Designed for use with Hettich Rotors. Hettich rotors are optimized for continuous duty and long service life

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Imprinted clear black graduations ensure accurate readings

Thermo Scientific™ CW3 Cell Washer

Thermo Scientific™ CW3 Cell Washer

Thorough, reproducible blood cell washing, up to 24 tubes per run with either fully automatic or manual modes.

Eppendorf™ 5804 R Centrifuges with A-4-44 Model Rotor

Eppendorf™ 5804 R Centrifuges with A-4-44 Model Rotor

Use this centrifuge for molecular applications in tubes up to 250mL. Eppendorf™ 5804 R Centrifuges offer additional swing-bucket and fixed-angle rotors and deepwell plate capacity for increased versatility.

Fisherbrand™ Low-Retention Microcentrifuge Tubes

Fisherbrand™ Low-Retention Microcentrifuge Tubes

Provides a secure seal—even over extended periods. Critical applications where minute sample recovery is important.

Eppendorf™ Polypropylene Graduated Microtubes

Eppendorf™ Polypropylene Graduated Microtubes

Use these tubes for safe handling of valuable and toxic samples as well as radioactive substances or DNA. Eppendorf™ Polypropylene Graduated Microtubes feature a hinged lid with a small hook that clips around the rim of the tube.

Fisherbrand™ Mini Plate Spinner Centrifuge

Fisherbrand™ Mini Plate Spinner Centrifuge

Specifically designed for quick and easy centrifugation of samples in PCR plates or microplates

Corning™ Centrifuge Tubes with CentriStar™ Cap

Corning™ Centrifuge Tubes with CentriStar™ Cap

Features CentriStar™ caps with an easy-on/easy-off flat top and offers advanced ergonomics with wider knurls and roll-over edge design for easier gripping. Corning™ Centrifuge Tubes with CentriStar™ Caps leak-proof design comes with a revolutionary plug feature that virtually eliminates all seepage when used under recommended conditions.

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed Polycarbonate Centrifuge Tubes

Perform a variety of applications thanks to the excellent mechanical strength of these high-speed polycarbonate centrifuge tubes.

Thermo Scientific™ SH-3000 Swinging Bucket Rotor

Thermo Scientific™ SH-3000 Swinging Bucket Rotor

Process microplates, PCR plates/tube strips and many commonly used centrifugal filtration and purification devices with the Thermo Scientific™ SH-3000 Swinging Bucket Rotor.

Thermo Scientific™ Nunc™ 15mL and 50mL Conical Sterile Polypropylene Centrifuge Tubes

Thermo Scientific™ Nunc™ 15mL and 50mL Conical Sterile Polypropylene Centrifuge Tubes

These premium, high-quality conical tubes are environmentally friendly, and allow for increased traceability with the largest writing area on the market.

Thermo Scientific™ Snap Cap Low Retention Microcentrifuge Tubes

Thermo Scientific™ Snap Cap Low Retention Microcentrifuge Tubes

Improve sample recovery by significantly reducing surface binding with these tubes that do not have additives or coatings.

Fisherbrand™ Premium Microcentrifuge Tubes: 2.0mL

Fisherbrand™ Premium Microcentrifuge Tubes: 2.0mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling

Eppendorf™ Polypropylene DNA LoBind Polypropylene Microcentrifuge Tube

Eppendorf™ Polypropylene DNA LoBind Polypropylene Microcentrifuge Tube

Maximize sample recovery of nucleic acids by significantly reducing sample-to-surface binding with these tubes. Eppendorf™ Polypropylene DNA LoBind Tubes are ideal for sample preparation and long-term storage.

Greiner Bio-One 2mL Polypropylene Microcentrifuge Tubes

Greiner Bio-One 2mL Polypropylene Microcentrifuge Tubes

For single use only. Greiner Bio-One Cell 2mL Polypropylene Microcentrifuge Tubes are graduated and free of heavy metal.

Thermo Scientific™ Round Buckets for 4-Place Swinging Bucket Rotor

Thermo Scientific™ Round Buckets for 4-Place Swinging Bucket Rotor

4 x 100mL capacity buckets fit the Thermo Scientific Swinging 4-place rotor (75-007-591)

Sarstedt™ Tube, 50mL

Sarstedt™ Tube, 50mL

Sarstedt™ Tube, 50mL feature a screw cap, a conical base, and printed writing space and graduations.

Corning™ Mini Microcentrifuge, 100-240V

Corning™ Mini Microcentrifuge, 100-240V

Corning™ Mini Microcentrifuge, 100-240V personal benchtop instrument operates at a fixed speed and is designed for quick spin downs of micro-samples.

Eppendorf™ Centrifuge Bucket

Eppendorf™ Centrifuge Bucket

Designed for use with Eppendorf Rotors and Centrifuges

Thermo Scientific™ Sorvall LYNX 6000 Superspeed Centrifuge

Thermo Scientific™ Sorvall LYNX 6000 Superspeed Centrifuge

The Sorvall LYNX 6000 superspeed centrifuge provides exceptional performance meeting evolving application needs, from academic research to production facilities, with up to 100,605 x g, and up to 6L capacity.

Eppendorf™ Safe-Lock Tubes, Forensic DNA Grade

Eppendorf™ Safe-Lock Tubes, Forensic DNA Grade

Provides protection against unintentional opening during incubation and storage. Eppendorf™ Safe-Lock Tubes, Forensic DNA Grade can withstand forces up to 30,000 × g.

Merck Ultrafree™-MC Centrifugal Filter Devices with Durapore™ Membrane

Merck Ultrafree™-MC Centrifugal Filter Devices with Durapore™ Membrane

Prepare and purify microcentrifuge samples. Ultrafree™-MC Centrifugal Filter Devices with Durapore™ Membrane enables fast, convenient sample preparation of very low hold-up volumes. Available in sterile and non-sterile versions and a variety of pore sizes.

  spinner