Fisherbrand Chromatography Vials and Closures

Chromatography_FB_Banner

Fisher Scientific offers a comprehensive range of chromatography consumables including glass autosampler vials, polypropylene PP or polymethylpentene TPX chromatography vials, microvials, micro-inserts, top closures, a broad variety of different septa materials for almost all applications, vials racks, microplates as well as crimping/decapping tools.

Our Fisherbrand range of autosampler vials are used with GC and LC autosamplers or other automated instruments, not only are their physical specifications and dimensions crucial for trouble-free operation, but they also have to fulfill strict requirements regarding inertness and cleanliness such that contamination is minimised and analytical results are not compromised.To select the appropriate chromatography vials for your chemicals and for your autosampler equipment, simply use:

ND8 Vials
Fisherbrand_8mm_Glass_Crimp_Neck_Vial

Crimp Neck Vials 8mm range

These vials are preferentially used on instruments from following manufacturers Agilent, Beckman, Carlo Erba, CTC, Fisons, PerkinElmer, Shimadzy, Thermo Scientific, VWR (Merck™/Hitachi). Refer to the Autosampler Compatibility Chart for further information. A broad selection of ND8* crimp neck vials and microvials are available, which can closed with 8 mmm aluminium caps, 9mm PE caps or 8mm push-on caps. Note that some microvials may need an adapter for full autosampler compatibility as typically they have a conical base and are therefore not free-standing.

*ND nominal diameter


ND9 Vials
Fisherbrand_9mm_Short_Thread_Glass

Short Thread Vials 9mm range

This is the universal autosampler vial, it can be used on all popular autosamplers thanks to their technical geometry, especially models manufactured by Agilent, HTA, Shimadzu, Thermo Scientific, Varian, and Waters. Refer to the Autosampler Compatibility Chart for further information).

ND10 to 13 Vials
Fisherbrand_Glass_Screw_Neck

Screw Neck Vials 10 and 13mm range

These screw neck 10mm diameter chromatography vials are preferentially used on autosampler models from the following manufacturers: Jasco, PerkinElmer, Shidmazu, Varian and Waters. Refer to the Autosampler Compatibility Chart for further information.

The 13mm vials are preferentially used on autosampler models from following manufacturers: Dionex, Shimadzu, Spark, Varian, VWR (Merck™)/Hitachi, Waters (Wisp 48 Position carousel), etc... Refer to the Autosampler Compatibility Chart for further information.


Fisherbrand_11mm_Crimp_Neck

Crimp Neck Vials 11mm range

These vials are preferentially used on autosampler models from the following manufacturers: Agilent, Carlo Erba, CTC, DANI, Fisons, Gerstel, Jasco, PerkinElmer, Shimadzu, Spark, Thermo Scientific and Varian. Refer to the Autosampler Compatibility Chart for further information.


Fisherbrand_11mm_Snap_Ring

Snap Ring Vials 11mm range

These vials are preferentially used with autosampler models from the following manufacturers: Agilent, CTC, DANI, Dionex, Jasco, Shimadzu, Spark, Thermo Scientific, Varian, VWR (Merck™)/Hitachi and Waters. Refer to the Autosampler Compatibility Chart for further information. Recommended for HPLC applications only, universally usable for almost all autosamplers, even for these with robotic handling.

ND22 to 24 Headspace/Shell vials
Fisherbrand_Shell_Vial_Kit

Shell Vials

These vials are preferentially used on autosampler models from following manufacturers: Alcott, Gilson, Shimadzu and Waters (Wisp 96 48-postion carousel). Refer to the Autosampler Compatibility Chart for further information.


Fisherbrand_Headspace_Vial

Headspace vials

As headspace vials have to withstand high internal pressures, almost all vials featured below have a wall thickness of 1,2mm to prevent bursting. Contrary to widespread opinion the seal and not the vial represents the weakest part of the whole vial assembly. Under pressure, the septa will press and bulge against the aluminium cap with such force that the cap is torn apart.

Refer to the Headspace vial compatibility chart to help you quickly identify those consumables (vials and seals) suited to your own instruments.


Fisherbrand_Snap_Cap_Vial

Snap Cap Vials ND18 and ND22

Easy to handle and inexpensive storage vials with push-on snap caps. For storage of powders and solids. No liners required in the cap.  

Special Purpose Vials, Plates and Tools
Fisherbrand_EPA_Screw_Neck_Vial

Screw Neck Vials EPA and vials for storage purposes

The EPA vials are preferentially used on autosampler models from the following manufacturers: Agilent, Dionew, Shimadzu, Tekmar, Thermo Scientific and Varian. Refer to the Autosampler Compatibility Chart for further information.

 

*UltraBond seals ND24 have a bonded cap and silicone/PTFE liner forming a inseparable unit which avoids the problem of liners detaching from the cap. UltraBond is achieved by a patented process that requires no adhesives but instead relies on molecular fusion of both components to achieve unity.





Resources